News:

Willkommen im Notebookcheck.com Forum! Hier können sie über alle unsere Artikel und allgemein über Notebook relevante Dinge disuktieren. Viel Spass!

Main Menu

Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.
Other options
Verification:
Please leave this box empty:

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Nachiket Mhatre
 - January 17, 2022, 19:17:50
You can use the M84 X and M84 Y commands to selectively shut down the X and Y axes, while still maintaining holding torque on the Z axis.

This will prevent the nozzle from dropping while levelling the bed. However, it would be smarter to connect to the printer through Pronterface and use the G0 command to move the nozzle exactly where you want it to.

You won't get accurate tramming while moving the extruder assembly by hand.
Posted by Redaktion
 - January 16, 2022, 14:55:44
The Voxlab Aquila S2 is able to print at high-speeds. A direct drive extruder with a fine stainless-steel drive wheel and an all-metal hotend, allow high printing speeds at temperatures up to 300 °C (572 °F).

https://www.notebookcheck.net/VoxeLab-Aquila-S2-3D-printer-review-150-mm-s-thanks-to-full-metal-hot-end-and-direct-drive-extruder.593172.0.html